#Edrawings print to scale mac os#
#Edrawings print to scale pdf#
#Edrawings print to scale full#
#Edrawings print to scale software#
#Edrawings print to scale windows#

#Edrawings print to scale mac os#

I use 3pl on a Mac (interfaced to the Mac OS by Crossover) and PDFwriter which appears as a printer on 3pl's 'print' dialog. These vary between computers and operating systems.

#Edrawings print to scale pdf#

To output in pdf from 3pl you use the 'print' functions so the actual conversion to pdf occurs outside of 3pl in the various print drivers on your computer. This tells me a dwg file contains less info than a pdf file. In contrast dwg format seems to be less broadly supported and even those who do support it seem to need verbal info on exactly how big things are supposed to be.

I have found that everybody is set up to use pdf which contains rich info on the drawing parameters including line weights, scaling factors, drawing dimensions etc. My experience with exporting 3pl files for use on both laser cutter and plotters suggests avoiding dxf and dwg formats and using pdf format instead. Leaders in Healthcare Architecture for over 55 yearsįrom: on behalf of 'Both Carrs ' Creating a file using real world dimensions in a model scale, and wanting 3pi to export real world dimensions to that scale. STL file I know is good for my 3D Printer, so I too can understand 3pi’s ‘scaling factor’ settings better. dwg file that he knows works with his laser cutter, and you import that file into 3pi to dissect how it was prepared? I just tried that with an. May I suggest you have your friend Jimmy give you a. So, bottom line, unless 3pi is scaling objects even further, your file may still be fine for the Laser cutter to interpret it correctly. dwg files you may have to zoom in quite a bit to see it. Make sure nothing in your file is a long distance away from 0,0 and when you export it to a program that can open. So make your 3pi drawing as small as you can to include only the objects you want to export. dwg files will zoom extents to the point at which all objects are visible. To make matters worse, AutoCAD, and most apps that open. dwg will be a micro dot and you will have to zoom in quite a high zoom factor to see it. dwg? A 32” line in a viewport scaled 1:64? Or a ½” line in a viewport scaled 1:1?ĭepending on your export settings (which is my problem), a ½” wide object in. So, the real problem is what is the Laser Cutter expecting in the. dwg in AutoCAD, both these settings are saved in the file. In AutoCAD, there is PaperSpace which is the size of the paper you are printing, and ModelSpace which is a viewport on that sheet scaled to view your 1:1 drawing to a scale that you want. However, I’m suspicious that in 3pi you should be exporting a 32” wide object.

#Edrawings print to scale software#

dwg file with ½” as the width? Or 32” width? If the software that Jimmy uses to cut the materials needs the drawings in actual inches of the model, I’m thinking your.

#Edrawings print to scale full#

So, are you drawing in 3pi a full scale ½” wide object, or a 32” wide object in S scale? Is the laser cutter expecting a. You mentioned your Sn3 Lintels are about ½” wide. To print to a scale drawing, the scale is a setting that is applied to the linework of that file for printing only. AutoCAD by default (and intent) creates drawings or 3D objects at full scale 1:1. DWG’s they are the native format of AutoCAD. While many applications can open / modify. I don’t have any experience with laser cutters or the files they may require however, as an Architect I have a lot of experience with. So, the scale settings may be a problem for you too. This wasn’t the case in Version 9 which I just recently upgraded (purchased) to V 11. DWG commands bring up a very similar dialog box to the export. I didn’t notice until now, that in version 11 the export.

You may have a very similar problem to mine. Does anyone have a solution for this problem before I take the time to learn another CAD program the supports those formats? I opened that file with eDrawings and the drawing is almost a micro dot and totally unusable. So, I drew it in the actual size and exported it to a DWG file. On the model the lintels are about 1/2 inch in width. So, I converted the lintel drawing to the size they would be in the model. When I drew the buildings I used full scale feet of what the building would have been in the real world. The software that Jimmy uses to cut the materials needs the drawings in actual inches of the model. He can import a DWG file into his software, but there is a problem. He uses a program that requires an EPS or a PDF file format.

#Edrawings print to scale windows#

Jimmy said he would be happy to laser cut the brick sheet for the windows and store fronts and the lintels for the windows if I supplied him the drawings. Their S scale brick sheets will be perfect materials for this type of structure. Last week I drew two concept models on 3rd PlanIt and had lunch with Jimmy Simmons from Monster Model Works. Most of the 30's era towns in the high country were of brick construction. I have been a bit frustrated because there is a very limited supply of brick town structures available. I am an Sn3 modeler modeling 30's era Colorado mountain towns.